Book of Shadows Box – Part 2

Welcome back my fellow adventurers! I have made a fair bit of progress on the box since my initial post of Book of Shadows Box – Part 1 but let's not jump ahead of ourselves, shall we? There is always a process as to what I'm doing, even if the majority of the time I don't realize it myself. So let's continue where I left off on this story.

Book of Shadows box cover concept

Inspiration and Prep

As I mentioned previously, I decided to use a couple of elements from a design concept I had set aside while working on a different custom box a couple of months prior. Sometimes when I design, I will like certain bits in the concept and not others so I'll set them aside for possible future use instead of what normally happens – crumbling the paper up and tossing it into the recycle. Not only did I have a better idea of what I wanted to do with the composition but I knew that I wanted to keep all of the elements within the same range of colors.

Photo References

The photo references I was using for the moth and the raven skull had very similar colors, ranging from greys and creamy whites with hints of pink, blue and even a little purple. I wanted to make sure the flowers were in this range so they could compliment the original
elements and work cohesively together. I settled on a beautiful photo I stumbled across of flowers of the Common Hawthorn. With yellowed white blossoms sporting hints of pink, this would tie together nicely. Of course up to this point I haven't decided on a color for the background or for the prayer beads but I know that I'll be able to sort that out once I have the other pieces colored.

Start of moth coloring

Speaking of color, I know that I am a bit of a strange one when it comes to working on wood. Other artists will prep their surfaces to use watercolors or acrylics. I, on the other hand, use primarily Prismacolor color pencils. I sand down the surface until it's smooth before taping transfer paper and then the design into place and trace what I've done. Thankfully I know how much pressure I need to use so as to not leave grooves in the wood during this part of the process. Once the transfer is done, I will get my colors selected and start coloring. Again, pressure needs to be firm enough to color but not so hard you're carving into the wood. The tricky part, however, is that the grain of the wood will sometimes attempt to dictate where the pencil goes. A straight line may end up being nudged into being curved. When such things happen, patience and going slow is the key.

Raven skull colored in

As you can see, I have most of the moth and the raven skull in at this point but both need a lot more work. However I want to try to get the other elements colored in first before I start blending everything together. Might be a bit before I continue this journey with you in Part 3 but until then, stay creative and enjoy your day!